Flash Bar FAQ

Questions About the Flash Bar

What shapes and combinations of Flash Bars can I make?

There are three segments to the Flash Bar currently; a straight segment, a 90 degree corner, and a 60 degree corner.

This provides a range of different shapes and sizes. Check out our Bar Builder tool to design your own bar!

What is the smallest Flash Bar I can order?

Technically, the smallest Flash Bar you can order is a single straight segment with end caps. This would be a sufficient starter bar that you can add on to as you go.

What are the Flash Bar dimensions?

The exact dimensions of the Flash Bar vary based on the size and shape bar you design.

However, we have the exact dimensions for each segment here:

Flash Bar Segment Dimensions

Can I use the Flash Bar for indoors and outdoors?

Yes! The Flash Bar is made from stainless steel with an acrylic counter top. However, if you plan on keeping the Flash Bar outside for an extended amount of time, we recommend covering it for protection.

What is the Counter Top made out of?

The stock counter top on the Flash Bar is a 9mm, scratch resistant, black acrylic. It is very durable and bolted onto the Flash Bar, therefore easily replaceable. We will be rolling out different counter top options over the coming months, the first of which will be a wooden counter top.

Flash Bar Accessories

How many LEDs do I need for the Flash Bar?

The LED Kit can only support up to 4 segments so additional kits will be required as the number of segments increases. Also, if you plan on splitting your Flash Bar into multiple stand alone bars (set of end caps needed for each bar) you will need an additional power source for your LEDs. Contact us for an additional LED power source.

I already have a Flash Bar, but I want to come back and add an accessory, can I?

Yes, absolutely!

We designed everything on the Flash Bar to be modular. Each accessory that we create can be retrofitted onto the Flash Bar.

For example, if you wanted to add an Ice Bin or Sink to your Flash Bar, you can do so. We’ve designed a modular shelf with a cutout for the Ice Bin or Sink that snaps onto the Flash Bar frame like the regular shelves.

How do I add graphics to my Flash Bar?

We handle graphics in house. Download our complete guide to artwork here!

Graphics for the Flash Bar are $16 per square foot.

Please be aware that lead times for a Flash Bar with graphics can vary and depend on when we get the final artwork files.

How many Flash Bar segments does the Road Case carry?

A single Road Case is designed to carry two straight segments OR two corner segments OR one straight segment one corner segment.

Basically, two Flash Bar segments for each Road Case.

You will need a Road Case for every two Flash Bar segment combinations you plan on transporting.

Do I need to purchase the Road Case?

No, you don’t need to purchase the Road Case to transport the Flash Bar, but it is recommended.

We designed the Flash Bar to transport easily with each light-weight piece stacking and laying flat. However, we have designed the Road Case to be a protective storage case to transport the Flash Bar efficiently and safely.

Shipping, Cost, and Installation

How do I turn the Flash Bar into two separate bars?

Each Flash Bar comes with ONE set of end caps.

To turn the Flash Bar into two separate bars, you will need to purchase an extra set of end caps (one set for each extended bar you would like to make).

The Flash Bar is modular and comes in segments. Theoretically, you can make as many bars as you’d like to any size and shape. However, because each bar comes with only one set of end caps, each stand alone Flash Bar will need it’s own set of end caps. This is how the bar was designed to work.

For additional inquiries on expanding your Flash Bar and purchasing end caps, please contact us!

How do I assemble the Flash Bar once it arrives?

The Flash Bar easily assembles with no tools! No segment takes more than a few minutes with a two person setup.

There is an assembly manual included with your Flash Bar order.

Furthermore, check out our setup video.

How much does the Flash Bar cost?

Flash Bar pricing is variable depending on how many segments you need.
Please visit the Flash Bar Builder for the most up to date pricing

Here is a breakdown of the different segments and their pricing:
Updated December 07,2018

  • Straight segment: $1,600
  • Circular segment: $1,750
  • 90 degree corner: $1,400
  • Reverse 90 degree corner: $1,400
  • 60 degree corner: $1,100
  • End caps (mandatory): $399

Flash Bar Accessories Pricing:

  • Ice bin: $399
  • Double Icebin Shelf: $619
  • Under Bar Ice Bin: $999
  • Showman's Shelf: $115
  • Sink -- No Plumbing: $554
  • Grey Water Sink: $589
  • Self Contained Sink -- Room Temp Water: $683
  • Self Contained Sink with Battery -- Room Temp Water: $962
  • Self Contained Sink -- Hot & Cold Water: $953
  • Speed Rail: $175
  • Half-Length Speed Rail: $210
  • Tiered Speed Rail: $255
  • Speed Rail (Circular segment ): $150

Please visit the Flash Bar Builder for the most up to date pricing

What is the shipping lead time on the Flash Bar?

Four to five weeks from when we get payment because we build them to order. Lead times can vary due to the size of the bar. Under 10 segments with no signage can be delivered in under 4 weeks.

If you need your Flash Bar sooner, call us and we can quote expedited shipping.